Buttner Elektronik MT iQ Basic Bedienungsanleitung Seite 29

Now plug the Hall sensor into the holder on the extension
cord until it snaps in audibly.
Please connect now the two cables at the end of the
extension cord with the battery's positive pole (red cable)
and its negative pole (blue cable).
Reconnect the pole terminal with the battery pole.
Subsequently connect the connection cable with the
display of the battery computer until it snaps in.
Hinweis
Note
Extension Cord
V
i
Extension Cord
Should the length of the conneci on cable included
i
in the delivery be insuffi cient, you can extend it
S
Should the length of the connection cable included
further by ordering MT01217 extension cord for
v
in the delivery be insufficient, you can extend it
the basic bat ery computer.
V
further by ordering the MT01217 extension cord
M
for the basic battery computer.
Büt ner Elektronik – MT iQ Basic
EN
E
29