Main Functions; Adjustment Of Battery Capacity - Buttner Elektronik MT iQ Basic Bedienungsanleitung

Display of Main Functions
❶
Via button , you can switch between the main displays
E
EN
of the battery computer.
Successively displayed will be: Capacity display in Ah
(programmed total capacity is shown in the bottom right-
❸
hand corner ), capacity display in %, currently flowing
power in A, battery voltage in V.
With current flowing, a display of "-" shows when current
is taken from the battery.
If the battery capacity reaches a value of under 20%, the
display will begin to flash as a warning and remains at the
20% displayed.
In order to designate charge/discharge currents below the
display limit of 1A, the display continuously alternates
between 0A and 1A for positive currents and between 0A
and -1A for negative currents.

Adjustment of Battery Capacity

❶
Press button for 5 seconds to get to the menu for
adjusting the total battery capacity.
This is evident by a flashing button symbol in the display.
Use the menu to adjust the total battery capacity installed
in your vehicle. You can slowly increase the value of the
❶
battery capacity by pressing the button . If you keep
pressing the button for a longer period, the value of the
battery capacity is increased ever faster.
Bütner Elektronik – MT iQ Basic
26 Mobile Technology – MT iQ Basic 25