Writing And Reading - SimonsVoss SmartCD.HF Kurzanleitung

SmartCD.HF

5 Writing and reading

ü
ü
ü
1. Place the card to be written or read on the SmartCD.HF.
2. Start the write or read process in the LSM software.
NOTE
Positioning of SmartTags and transponders with RFID inlay
The antenna of the SmartCD.HF is very large. Small RFID antennas
placed in the middle are therefore not reached.

EN
LSM from version 3.1 installed.
LSM 3.1 and 3.2: Driver installed manually.
SmartCD.HF connected.
Place SmartTags and transponders with RFID inlay on the edge of
the SmartCD.HF.
5. Writing and reading
19 / 76