Intended Use; General Safety Instructions - SimonsVoss SmartCD.HF Kurzanleitung

SmartCD.HF

1 Intended use

The SmartCD.HF is an ultra-flat programming device with which you
can conveniently write and read SmartCards. SmartTags and RFID
inlays are also supported.
The SmartCD.HF is ideal if you only use hybrid locking devices. While
you program the locking devices with a suitable active programming
device, you can conveniently program the RFID identification media
with the SmartCD.HF.
Programming locking devices is not possible with the SmartCD.HF.

2 General safety instructions

Signal words
DANGER: Death or serious injury (likely), WARNING: Death or serious
(ANSI
injury (possible, but unlikely), CAUTION: Minor injury, IMPORTANT:
Z535.6)
Property damage or malfunction, NOTE: Low or no damage
WARNING
Blocked access
Access through a door may stay blocked due to incorrectly fitted and/or
incorrectly programmed components. SimonsVoss Technologies
GmbH is not liable for the consequences of blocked access such as ac-
cess to injured or endangered persons, material damage or other dam-
age!
EN
1. Intended use
15 / 76