Memory Mode - COMED ET-101A Bedienungsanleitung

Temperature Taking Hints
4. When using the thermometer on infants under age 1, pull the ear up
making sure the sensor faces the eardrum. (See Figure 5)
5. When using the thermometer on individuals over the age of 1, pull
the ear back making sure the sensor faces the eardrum. (See Figure 6)
6. Do not touch the probe tip. A cotton swab and rubbing alcohol
may be used to clean the sensor tip.
7. If thermometer is stored in a significantly different environment
than testing location, place it in the testing location for
approximately 30 minutes prior to use.
1. The Memory Mode can be accessed two ways:
a) After the thermometer has been turned on and displays the
screen depicted in Figure 3, press and hold the On/Off
Button. The letter " M" will appear in the upper left corner
of the display. (See Figure 7 )
b) After testing, press and hold the On/Off Button for several
seconds until the letter" M" appears in the upper left corner
of the LCD.
2. The thermometer will automatically memorize the last 10
temperature readings. Each time the On/Off Button is pressed,
the screen displays past readings that correspond with a
number 0-9. The number 0 reflects the most recent reading
while the number 9 reveals the oldest reading stored in memory.
(See Figure 8)
3. After the LCD displays the last memorized reading(number 9)
or press Test Button in the memory mode directly the thermometer
will enter into testing mode.
6

Memory Mode