Menu; Menu Icons; Camera - Pairing - Truelife R360 Bedienungsanleitung

MENU

To access the Menu, press the Menu button on the parent unit and then use the „right" and „left"
arrows to navigate between the menus and then the „up" and „down" arrows to navigate in each
of the menus.

Menu icons

1. Camera settings
a. Cyclic camera switching
b. Selecting the camera display
i. Split screen (first and second camera displayed)
In this mode, you can switch between the individual cameras using the „OK" button. The
selected camera is displayed in red.
ii. First camera only
iii. Second camera only
Note: You can also use this function directly using the „Switch camera" button.
c. Pair camera
d. Remove camera
2. Set the lullaby for the current camera
3. Alert interval
4. Set the volume of the parent unit
5. VOX Mode
6. Other settings
a. Set the brightness of the display
b. Set the time interval for switching off the display
c. Set the current time
d. Set the temperature unit (°C or °F)
CAMERA – PAIRING
Pairing other cameras
1. Open the menu, navigate to the item „Camera settings" and use the up arrow to move to the
„Camera pairing" icon, press the „OK" button.
a. Then select the icon (number 1 or 2) to which you want to assign the camera and confirm
this with the OK button.
2. At this point, press and hold the „encryption button" on the bottom of the paired camera until
the camera image appears on the display of the parent unit.
Re-pairing the camera
1. First remove the camera in the parent unit by navigating to the „Camera settings" icon in the
menu, then to the „Remove camera" icon and then confirm with the OK button.
a. Next, you need to select the camera you want to pair (the paired camera will contain the
character * next to the icon) and confirm with the OK button.
6