LED's light Pro 2400340-1 Betriebs- / Installationsanleitung Und Technische Daten Seite 3

Remote Control button Operation
EN EN
BUTTON
DE
NL
FR
ES
Change sensor settings
1. Press the
indication LEDs.
2. Press the navigation keys
shows which setting view you're in on the remote control. Press the navigation key
change parameters of the selected setting type (flashing LED).
3. Press to save the current settings view to the remote control.
4. Point the remote control at the sensor you want to set up and press the
product with the sensor will flash 1x to confirm that it has received the settings. This step can be
repeated with multiple luminaires with the same sensor so that all luminaires contain the same
settings.
DESCRIPTION
Press the <on/off> key
to turn the lamp on or off
permanently. The highbay
responds by blinking once.
(Press key to exit this
mode)
- Displays the latest settings
by means of the remote
control LEDs indication.
- Resets the settings to the
dip-switch settings of the
sensor
Activate/navigate the remote
control settings
Confirm setting/parameter
Activate display of saved
settings in remote control
button, the remote control will display the last settings of the remote control via the
to navigate through the current settings. A flashing led indicator
BUTTON DESCRIPTION
The remote starts in
setup mode with the last
programmed settings
Put the sensor in test mode,
the product responds 2 sec-
onds to motion detection
Change parameters on the
remote control
Send current remote control
setting view to sensor
Activate the daylight func-
tion on the remote control
button to send it. The
to