Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2400340-1
Sensor programmable remote control
User manual
Specifications
Power supply:
Range:
Environment temperature: 0-50° C
Dimensions:
WARNING
Remove the batteries if the remote control is not used for an
extended period of time (>30 days).
INTRODUCTION
INTRODUCTION
The infrared controlled remote control is a tool for the external configuration of the sensor highbay (Art.Nr.:
The infrared controlled remote control is a tool for the external configuration of the sensor highbay
2400340). With one remote control, you can configure multiple highbays simultaneously. The maximum
2400340). With one remote control, you can configure multiple highbays simultaneously. The ma
distance to the relevant highbay is 15m.
distance to the relevant highbay is 15m.
INDICATION LEDS
INDICATION LEDS
On the remote control there are a number of indication LEDs in the upper part.
On the remote control there are a number of indication LEDs in the upper part.
These have the following meaning:
These have the following meaning:
LED
LED
Brightness
Brightness
Sensitivity
Sensitivity
Hold time
Hold time
Daylight sensor
Daylight sensor
2x AAA 1.5V battery (Alkaline)
up to 15m
123 x 70 x 20.3mm
DESCRIPTION
DESCRIPTION
Light brightness Threshold(-
Light brightness Threshold(-
during Occupancy detection)
during Occupancy detection)
Sensor detection range
Sensor detection range
sensitivity
sensitivity
The time that the item will
The time that the item will
remain switched on, after
remain switched on, after
detection, until it switches
detection, until it switches
back to off/standby
back to off/standby
Enable motion detection in
Enable motion detection in
even in daylight
even in daylight
buttons remote
LED
LED
Standby-dim
Standby-dim
Standby-time
Standby-time
buttons remote
(img.01)
DESCRIPTION
DESCRIPTIO
Lux value setting where the
Lux value setting
motion sensor switches on
motion sensor sw
Setting lux threshhold
Setting lux thres
where the lamp works
where the lamp w
permanently (even without
permanently (eve
occupancy detection)
occupancy detec
Luminosity / dimming level
Luminosity / dim
after the set "hold time" has
after the set "hol
expired
expired
Duration of "standby-dim"
Duration of "stan
level after motion is detected
level after motio
EN
EN
(img.
DE
NL
FR
ES
Werbung
