1
GB | Digital Bathroom Scales
Read these instructions carefully before first use of the product.
Technical Specifications
toughened safety glass: 5 mm
LCD display: 75 × 29 mm
maximum load capacity: 180 kg (3–180 kg)
measurement resolution: 0.1 kg
unit of measure: kg/lb/st
automatic switch-off after 20 seconds
power supply: 2× 1.5 V AAA batteries (included)
Display Description
„Lo" – Batteries low. Low batteries should be removed immediately to prevent damage to the scales.
„Err" – Scales overloaded, maximum load capacity is 180 kg. Leave the scales to avoid damaging them.
Button Description
Underside (see fig. 1)
1 – UNIT button
2 – battery compartment
Weighing
1. Place the scales on a flat, hard and stable surface.
2. Carefully step onto the scales – the scales turn on automatically.
3. Stand still on the scales and don't move – after a moment, the display will show the measured weight.
4. You can change the unit of weight between kg/lb/st by repeatedly pressing the UNIT button on the underside of the
scales. You can change the setting even before turning on the scales.
5. After 20 seconds, the scales turn off automatically.
Changing Batteries
1. Open the battery compartment cover on the underside of the scales.
2. Remove the depleted batteries.
3. Insert new 2× 1.5 V AAA batteries. Make sure you observe the correct polarity. Use alkaline batteries only. Do not use
rechargeable batteries.
4. Close the cover.
Cleaning and Maintenance
1. Clean the scales using a moist cloth and make sure water does not enter the interior of the scales. Keep the glass surface
dry. Do not use chemical detergents or detergents with abrasive effect.
2. Do not submerse the scales in water!
3. Always keep the scales in horizontal position.
4. If the scales cannot be turned on, verify that batteries are inserted and that they are not drained.
5. If an error is displayed or the scales won't turn on, remove the batteries and reinsert them after approx. 5 seconds.
1
2
2