Whispbar K911W Montageanleitung Seite 6

EN
Fitting Kit
K911W
Fitment
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
Clamps directly to edge of roof under the
doors
Please check the front of this manual for
information relating specifically to your
vehicle.
It is important to put the pads in the correct
position on the vehicle.
Letters refer to the pad part numbers and
position.
Pad Part Number:
A = 219
B = 222
C = 223
Refer to the underside of the pad for the
part number.
6