Introduction; Safety Instructions - EuroLite STT-400/85 Bedienungsanleitung

STT-400/85 Winch-driven Stand
For your own safety, please read this user manual carefully before you initially start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

INTRODUCTION

Thank you for having chosen a EUROLITE STT-400/85 winch-driven stand. If you follow the instructions
given in this manual, we are sure that you will enjoy this device for a long period of time.
Unpack your stand.

SAFETY INSTRUCTIONS

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
Before you initially start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the stand.
A crashing load or a collapsing stand can cause deadly accidents. All safety instructions given in
this manual must be observed.
The stand must only be installed on a plane area with a maximum inclination angle of 5°.
When using stands under the influence of horizontal forces, e. g. through wind, the standing safety can be
impaired. This is why additional safety measures like attaching ballast weights have to be taken.
Always use inclined tension cables when a lifting height of 2.50 m and a carrying capacity of 18 kg is
exceeded!
USER MANUAL
DANGER TO LIFE!
10/16 00031427, Version 1.2