Factory Default Settings; Trouble Shooting And Faq - Commidt MAESTRO Bedienungsanleitung

What you see
Solid blue light
Flashing red light
Solid blue light
(while charging)
Flashing red light
(while charging)
Alternate blue and
red light

Factory default settings

• This function deletes all pairings on the Maestro.
• Any settings made after you received the device will also be deleted.
• Press and hold the pairing button. First you will hear a double tone
which indicates the device is set to pairing mode. You must keep the
button pressed until you hear the second double tone.
• Switch off the Maestro. When you switch the device on again, it will
automatically go into pairing mode (the battery indicator lamp will
flash alternately red and blue). This indicates that the device has
been reset to the factory default settings.

Trouble shooting and FAQ

The Maestro will not switch on!
• Charge the battery
The Maestro will not charge!
• Make sure the power supply is correctly connected to the
Maestro and that the plug is working.
I hear crackling!
• For best sound quality, the Maestro must be within range of the
mobile phone, Liberto/Allegro or Audiostreamer.
• If you are using the earbuds, make sure the plug to the earbuds is
correctly connected.
User manual Maestro (NO_EN_F_D_NL_ES_SE_DK_SU) 1t
Downloaded from www.Manualslib.com
Battery indicator lamp
What this implies for the Maestro
The battery level is between 100% - 20%
The battery level is below 20%
Charging complete
The Maestro is charging
The Maestro is ready for pairing
manuals search engine
7
NO
EN EN
F
D
NL
ES
SE
DK
SU
12