Declaration Of Conformity - Commidt MAESTRO Bedienungsanleitung

NO
Removal of the battery:
EN
1. Unscrew the screw on the rear of the unit
2. Remove the front cover
F
3. Unscrew the screw on the circuit board.
4. Remove the circuit board
D
5. Unplug the battery
NL

Declaration of conformity

ES
We COMMidt, Kirkegata 57-59, 7600 Levanger, Norway declare
under our own responsibility that the Bluetooth products to which this declaration
SE
refers conforms withthe relevant standards or other standardised documents.
• 93/42/ EØF
DK
• NS-EN 12182
• ETSI EN 301 489-1 V1.4.1 (2002-08)
• ETSI EN 301 489-17 V1.2.1 (2002.08)
SU
• EN 300 328 V1.6.1 (2004-11)
• EN 61000-4-3, 5.1
• EN 61000-4-2, 5.2
According the regulations in Radio Equipment and Telecommunications Terminal
Equipment (R&TTE) Directive 1999/5/EC
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This device is a class 2 Bluetooth device (max 2 mW EIRP). Due to the low level
of transmit output power the device is not subject to the routine RF exposure
valuation as per Section 2.1093 of the FCC rules.
Levanger 2009-04-24
Roar Austvik
Managing Director, COMMidt
C
Downloaded from www.Manualslib.com manuals search engine
User manual Maestro (NO_EN_F_D_NL_ES_SE_DK_SU) 1t