Genie e-note The NoteTaker Bedienungsanleitung Seite 23

When the pen is not in use it powers off automatically after 60 minutes.
It is recommend that while not in use, the pen is placed as shown, to avoid interface with a regular mouse operation.
Installing NoteTaker software
1. Insert the installation CD into your CD ROM drive. The setup program should start automatically. If not, run the
program by selecting 'Run' from the Windows 'Start' menu and type in D:\setup.exe. If your CD drive uses a different
letter, type that letter instead of D.
2. Follow the instructions on the screen.
3. Once installation is complete, automatic driver installation will start. Please follow the steps during this process.
4. After the installation process, when running the application for the 1st time, a new folder named "My Notes," is
created in your "My Documents" directory. All your notes will be saved into this directory. In the event that no "My
Documents" directory is found, the installation process will create a new "My Documents" folder on your C hard drive.
The 'My Notes' folder will then be created under this directory. If you uninstall, upgrade or reinstall the software in a
different location, the note files will remain in this directory, and will not be overwritten.
Uploading Notes to your PC
When in On-line Mode, you can upload all your notes from the memory unit to your PC using the NoteTaker software
application. Before doing so, first make sure that:
·Your PC software application is running
·Your memory unit is connected to your PC's USB port using the memory unit USB cable
The following icon indicator will be displayed on your memory unit LCD during USB connection.
To upload notes:
1. Start the NoteTaker Manager.
2. In the 'File' menu, select 'Upload'. All notes in your memory unit are uploaded to your PC.
3. At the end of the process, a message appears asking if you want to delete all notes on the memory unit.
·Select 'Yes' to erase all notes on your memory unit.
·Select 'NO' to retain the notes.
NOTE:
· When you select 'NO', the next time you upload those notes that are already uploaded to the PC Will not be
uploaded.
However, if you delete notes from the PC application and then upload again from the memory unit, the notes will be
uploaded again.
· You can select one of three options to be performed automatically when your Mobile NoteTaker base unit is
connected. The following can be selected in the 'Configuration -->Preferences' menu within the Note Manager.
Upload new notes automatically options:
·YES – Your Mobile Notes will be automatically uploaded each time you connect it to your PC
· NO – Your Mobile Notes will not be uploaded. In this option, you will manually need to perform this action by
selecting 'File -->Upload' menu within the Note Manager
· ASK ME – Each time you connect the Mobile NoteTaker base unit, you will be prompted if you want to upload
your notes
Operation mode of the digital pen
When connected to PC, NoteTaker supports a Note mode and a Mouse Mode.
In Note mode, writing on a paper with the digital pen will create an Ink note within the NoteTaker application.
In Mouse mode, the digital pen acts as a mouse with features like hovering, left and right click. The click button is
Downloaded from www.Manualslib.com manuals search engine
- 40 -