Setting The Eco Mode Temperature Lowering-Level; Setting The Frost Protection Temperature; Comfort Setpoint Temperature Limit; Setting Of The Maximum Duration Of Authorised Boost - Cordis PLUS Gebrauchsanweisung

English
L3 mode is the default setting.
Press or to choose the setting you require..
2- Press to save and move to the next setting.
To exit the user settings, press

12.3 Setting the Eco mode temperature lowering-level

The drop in temperature is set at -3,5°C compared to the set temperature of the
Comfort mode. You can adjust the lowered level from -1°C to -8°C, by intervals
of 0,5°C.
Important: whatever the lowering level set, the Eco setting temperature will
never exceed 19°C.
3- Press or to obtain the temperature level you require.
4- Press to save and move to the next setting.
To exit the user settings, press

12.4 Setting the frost protection temperature

Your device is preset at 7°C. You can adjust the Frost protection temperature
from 5°C to 15°C by intervals of 0,5°C.
5- Press or to obtain the temperature you require.
twice.
twice.
6- Press to save and move to the next setting. To exit the user
settings, press twice.

12.5 Comfort setpoint temperature limit

You can limit the setting temperature range by introducing a maximum and/or
minimum setting, preventing unintentional changes in temperature.
• Low temperature limit
Locking of the setting range using a minimum temperature stop, preventing
the temperature from being set below that temperature.
The minimum setting is preset to 7°C. You can adjust from 7°C to 15°C by
intervals of 1°C.
7- To change the minimum temperature setting, press
save by pressing .
If you do not want to change it, press
to set the maximum setting. To exit the user settings, press
• High temperature limit
Locking ofthe setting range using a maximum temperature increase,
preventing the temperature from being set above that temperature. The
maximum setting is preset to 30°C. You can adjust from 19°C to 30°C by
intervals of 1°C.
8- To change the maximum temperature setting, press
To save and move to the next setting, press
press twice.

12.6 Setting of the maximum duration of authorised Boost

The maximum duration of Boost is preset at 60 min. You can adjust it from 30
to 90 min, by intervals of 30 min.
- 30 -
or
1 2
: the device changes automatically
twice.
or .
1 2
. To exit the user settings,
Cod. 1910000000276 - nv01
then