Consumption Indication Accumulated In Kwh, Energy Savings; Child Anti-Tamper, Keypad Lock/Unlock; Day And Daily Programme Integrated, Energy Savings - Cordis PLUS Gebrauchsanweisung

English
Note: you can limit the Comfort temperature.

11.7 Consumption indication accumulated in KWH, energy savings

It is possible to see the estimation of energy consumption in KWH since
the last reset of the energy meter.
• Display of the estimated power consumption
To see this estimation, from Auto, Comfort, Eco or Frost protection mode,
then press . To exit the display mode of consumption: press
, the device returns automatically in the previous active mode.
1 2 3 4 5 6 7
• Resetting the energy meter
To reset the energy meter, from Auto, Comfort, Eco or Frost protection
mode, then proceed as follows.
1- Press .
2- Press simultaneously and
resetting the energy meter, press
automatically in the previous active mode.

11.8 Child anti-tamper, keypad lock/unlock

• Keypad lock
To lock the keypad, press and hold the
seconds. The padlock symbol
locked.
• Keypad unlock
To unlock the keypad, press and hold the
seconds again. The padlock symbol
is unlocked. when the keypad is locked, only the button (or switch) is active
. If the device is on Standby mode when the keypad is locked, you have
to unlock it for the next heating on to access the setup.

11.9 7 day and daily programme integrated, energy savings

In questa modalità è possibile programmare il dispositivo impostando uno
dei cinque programmi proposti per ogni giorno della settimana.
• Access to the programming mode
From Auto, Comfort, Eco or Frost protection mode, press
to enter into the programming mode.
Schematic sequence of programming settings:
→
Setting time
• Setting day and time
In this mode, you can set day and time to programme your device in line
with your needs.
1- From Auto, Comfort, Eco or Frost protection mode, press
seconds.The cursor moves to the setting day and time mode.
for more than 5 seconds. To exit
or , the devices returns
and buttons for 10
appears on the display, the keypad is
3
and buttons for 10
disappears from the display, keypad
for 5 seconds
→
Programmes
Setting day
choice
or
2- Select using or
quickly if you hold the
3- The minutes figures will flash. Select using
.
4- The cursor above the number 1 (which represents the monday) will flash.
Select the day using
5- To change and/or allocate programmes, press
day mode, press
• Programmes choices
Schematic sequence of programmes:
→
Comfort Eco
Your device's default setting is non-stop Comfort for 7 days a week.
• Programmes overview
for 5
- Your device will operate in Comfort mode, 24 hours a day, for wach day
selected.
Note: You can se the Comfort mode temperature to the temperature you
require (see the Setting the Comfort mode temperature section).
- P1: Your device will operate in Comfort mode from 06:00 to 22:00 (and in Eco
- 26 -
1
5 sec.
. The hours figures will flash. The hours will scroll
or buttons. Save by press
1
1
or
1
1
or . Save by pressing
1
1
3 times.
→ →
P1 P2
Cod. 1910000000276 - nv01
.
2
. Save by pressing
2
.
2
. To exit the time and
→
P3