Intended Use; List Of Main Parts - Go/on SCID133106D Originalbetriebsanleitung

Use clamps or another practical way to secure and support the workpiece to a stable
platform. Holding the work by your hand or against the body leaves it unstable and may lead to
loss of control.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
- lead from lead-based paints,
- crystalline silica from bricks and cement and other masonry products, and
- arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemicals: work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.

INTENDED USE

The machine is intended for impact drilling in brick, concrete and stone as well as for drilling in
wood, metal and plastic.
LIST OF MAIN PART
1. Drill chuck
3. Depth gauge
5. Locking button
7. Speed control knob
5
2. Hammer drill switch
4. Reverse-rotation lever (forwards/reverse)
6. On/off switch
8. Auxiliary handle