Symbols Used, Inserting / Changing Batteries - Stûv TULOX 100 Benutzerhandbuch

Symbols used
ü
Entry OK
O
Entry wrong or denied
Short key tone, high
Long key tone, high
Inserting / Changing Batteries
To insert or change batteries, take the
cover off with slight tensile.
Insert new batteries (4x, 1.5V, alkaline,
AA, mignon, LR6) in the keypad.
Make sure the right polarity is used, as
indicated on the case.
If the cover is not put on correctly,
the lock cannot be operated.
After the cover has been placed back on, the keys will emit a different tone (at a lower frequency) until a valid code has been entered.
If you hear different tones without having intentionally removed the cover, check the keypad for potential manipulation!
!
If the cabinet has an additional handle for opening, it must be turned all the way into
locking position.
If this is not done, the electronic lock cannot be operated properly.
Only then enter the code, wait for the audible release indicator and turn the rotary
handle clockwise to 60 degrees.
The electronic lock is now unbolted and the safe can be opened using the extra handle,
if available.
User Manual TULOX 100
o
o
2 sec.
Dismounting the cover
Steinbach & Vollmann GmbH & Co. KG • 42579 Heiligenhaus
LED on
LED off
Short key tone, low
H
Press key for 2 sec.
Place cover on
Be sure the keys
are straight.
LED
- 19 -