Safety; Intended Use; Safety Instructions - Zipper Maschinen ZI-STB13T Betriebsanleitung

11

SAFETY

11.1 Intended Use

The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse. To use the machine properly you must also observe and follow all safety regulations, the
assembly instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards. It is also imperative to observe the accident prevention
regulations in force in your area. The same applies for the general rules of occupational health and
safety.
The machine is used for:
Drilling in wood, plastic and metal with chuck B16 (drillø 1.5-13mm).
Work the materials only with suitable drills.
This machine is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the machine by a person responsible for their safety. Never allow children
or people unfamiliar with these instructions to use the machine. Supervise children. This will ensure
that children do not play with the unit.
Any manipulation of the machine or its parts is a misuse, in this case ZIPPER-Maschinen and
its sales partners cannot be made liable for ANY direct or indirect damage.




Ambient conditions
The machine may be operated:
humidity
temperature
The machine shall not be operated outdoors or in wet or damp areas.
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
Prohibited use
 The operation of the machine outside the stated technical limits described in this manual is forbidden.
 The operation of the machine without provided protective devices is prohibited.
 The use of the machine not according with the required dimensions is forbidden.
 The use of the machine not being suitable for the use of the machine and not being certified is
forbidden.
 Any manipulation of the machine and parts is forbidden.
 The use of the machine for any purposes other than described in this user-manual is forbidden.
 The unattended operation on the machine during the working process is forbidden!
 It is not allowed to leave the immediate work area during the work is being performed.

11.2 Safety instructions

Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator and
limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
In this machine following protective equipment is in effect:
 Shutdown when opening the belt cover or spindle guard
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-STB13T
Use only drills allowable for this machine!
Never use a damaged drill!
Never use the machine with defective or without mounted guards!
The removal or modification of the safety components may result in damage to
equipment and serious injury!
W A R N I N G
HIGHEST RISK OF INJURY!
max. 70%
+5°С to +40°С (+41°F to +104°F)
N O T I C E
SAFETY
19