Lcd Display Icons; Standard Equipment; Laser Classification; Fcc Statement - RIDGID micro LM-100 Bedienungsanleitung

micro LM-100 Laser Distance Meter

LCD Display Icons

Single
Measurement
Laser
Active
Reference
Top
Reference
Bottom
Memory
Location
Measuring
Functions
Figure 3 – micro LM-100 LCD Display

Standard Equipment

• micro LM-100
• Carrying Case
• Wrist Strap
6
Battery In-
Device Malfunction
dicator
• Batteries (2 AAA)
• Operator's Manual
NOTI E
ments. Incorrect use or improper application may result in incorrect
or inaccurate measurements. Selection of appropriate measure-
ment methods for the conditions is the responsibility of the user.
Second
Prior

Laser Classification

Measurement
The RIDGID micro LM-100 generates a visible laser
beam that is emitted from the top of the device.
The device complies with class 2 lasers according to: IEC 60825-
Min Max
1:2007
(Continuous)

FCC Statement

This equipment has been tested and found to comply with the lim-
First Prior
its for a Class B digital device, pursuant to part 15 of the FCC Rules.
Measurement
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruc-
Single
tions, may cause harmful interference to radio communications.
Measure-
ment/Calcula-
However, there is no guarantee that interference will not occur in a
tion Result
particular installation.
If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for
help.
This equipment is used to make distance measure-
999-998-391.09_REV. D