Nitto Kohki delvo DLV02SL-CKE Bedienungsanleitung Seite 5

*Use the screwdrivers in combination with the following special controllers.
Controller: DLC16S-WGB / DLC16S-WGB
*L ：A-weighted surface sound pressure level
pA
*L ：A-weighted sound power level
WA
CONTROLLER
MODEL
Input
Power supply
Output
Mass
Shape of Plug
Standard
Screwdrivers and Controller are common to this item
Operating
Temperature
Range
Storage
Relative Humidity
Operating Environment
Pollution Degree
Over Voltage Category
・ ・ ・ ・ Grounding
The tool should be grounded while in use to protect the operator from electric shock. The tool is
equipped with a thee-conductor cord and thee-prong grounding-type plug to fit the proper
grounding-type receptacle. The green (or green and yellow) conductor in the cord is the grounding
wire. Never connect the green (or green and yellow) wire to a live terminal. If your unit is for use on
less than 150V, it has a plug that looks like that shown in Figure A. An adapter (see Figure B) is
available for connecting Figure A-type plugs to 2-prong receptacles. The green colored rigid
grounding strap must be connected to a permanent ground such as to a properly grounded outlet box
as shown in Figure C.
WARNING WARNING
WARNING WARNING
For safe use of adapters, the outlet box must be grounded. If there is any doubt, have a qualified
electrician check connections.
Use only 3-wire extension cords that have 3-prong grounding type plugs and 3 pole receptacles that
accept the plug. Replace or repair damaged cords.
DLC16S-WGB
100 240 V AC 50/60 Hz
to
20
to
0.38 kg / 0.84 lbs
Europe
CE
-5 +50 °C
to
-20 +70 °C
to
Free of Dew (include time of the Storage)
less than 2000m (6557 ft) above sea level
degree 3 according to IEC60664-1
category II according to IEC60664-1
4
DLC16S-WUB
30V DC
U.S.A.
UL
23 to 122 °F
-4 to 158 °F