Installing In Vehicles; Mount To Windshield; Adjust Device Position - AIPTEK X-mini Anleitung

EN

2.2 Installing in Vehicles

2.2.1 Mount to Windshield

1. Attach the device to the bracket
base. Turn and tighten the car
holder and the bracket base to
make sure the device is
securely locked in place.
2. With the suction-cup laying flat,
position the suction-cup on the
windshield.
3. Hold the base firmly on
the windshield and press
down the clamp to mount the car
holder to the windshield. Make
sure the base is securely locked
in place.

2.2.2 Adjust Device Position

Rotate the knob to swivel
the device vertically.
www.aiptek.com Page 10
C C
AR AMCORDER
Knob
Rotate the knob to swivel the
device horizontally up to 360° .
User's manual
Knob