Electrical Safety; Safety In The Workplace; Personal Safety - UNIPRODO UNI AIR PURIFIER 02 Bedienungsanleitung

DE
e) Halten Sie das Gerät außerhalb der Reichweite
von Kindern.
f) Reparatur und Wartung von Geräten dürfen
nur von qualifiziertem Fachpersonal und mit
Originalersatzteilen durchgeführt werden. Nur
so wird die Sicherheit während der Nutzung
gewährleistet.
g) Um die Funktionsfähigkeit des Gerätes zu
gewährleisten, dürfen die werksmäßig montierten
Abdeckungen oder Schrauben nicht entfernt
werden.
h) Berühren Sie keine beweglichen Teile oder
Zubehörteile, es sei denn, das Gerät wurde vom
Netz getrennt.
i) Das Gerät muss regelmäßig gereinigt werden,
damit sich nicht dauerhaft Schmutz festsetzt.
j) Lufteinlass und Luftauslass dürfen nicht verdeckt
werden.
k) Das Gerät ist kein Spielzeug. Reinigung und
Wartung dürfen nicht von Kindern ohne Aufsicht
durch eine erwachsene Person durchgeführt
werden..
l) Es ist untersagt, in den Aufbau des Geräts
einzugreifen, um seine Parameter oder
Konstruktion zu ändern.
m) Geräte von Feuer – und Wärmequellen fernhalten.
ACHTUNG! Obwohl das Gerät in Hinblick
auf Sicherheit entworfen wurde und über
Schutzmechanismen sowie zusätzlicher
Sicherheitselemente verfügt, besteht bei
der Bedienung eine geringe Unfall- oder
Verletzungsgefahr. Es wird empfohlen, bei der
Nutzung Vorsicht und Vernunft walten zu lassen.
4
U S E R M A N U A L
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
ATTENTION! Electric shock warning!
Class II protection device with double
insulation.
Only use indoors.
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
The terms „device" or „product" are used in the warnings
and instructions to refer to AIR PURIFIER. Do not use
in very humid environments or in the direct vicinity of
water tanks. Prevent the device from getting wet. Risk
of electric shock! Do not cover air inlets / outlets! Do not
put your hands or other items inside the device while it
is in use! Do not cover the ventilation openings!

ELECTRICAL SAFETY

a) The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed
device is exposed to rain, comes into direct
contact with a wet surface or is operating in
a damp environment. Water getting into the
device increases the risk of damage to the device
and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never
use it to carry the device or to pull the plug out of
a socket. Keep the cable away from heat sources,
oil, sharp edges or moving parts. Damaged or
tangled cables increase the risk of electric shock.
e) Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician
or the manufacturer's service centre.
f) To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not
use the device on wet surfaces.
g) ATTENTION! DANGER TO LIFE! While cleaning,
never immerse the device in water or other
liquids.

SAFETY IN THE WORKPLACE

a) Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust. The device
generates sparks which may ignite dust or fumes.
5 EN
b) If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
c) Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
d) Only the manufacturer's service point may
repair the device. Do not attempt any repairs
independently!
e) In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on
2
live electrical devices) to put it out.
f) Please keep this manual available for future
reference. If this device is passed on to a third
party, the manual must be passed on with it.
g) Keep packaging elements and small assembly
parts in a place not available to children.
h) Keep the device away from children and animals.
i) If this device is used together with another
equipment, the remaining instructions for use
shall also be followed.

PERSONAL SAFETY

a) To prevent the device from accidentally switching
on, make sure the switch is on the OFF position
before connecting to a power source.
b) The device is not a toy. Children must be
supervised to ensure that they do not play with
the device.
SAFE DEVICE USE
a) Do not use the device if the ON/OFF switch does
not function properly (does not switch the device
on and off). Devices which cannot be switched on
and off using the ON/OFF switch are hazardous,
should not be operated and must be repaired.
b) Make sure the plug is disconnected from the
socket before attempting any adjustments,
accessory replacements or before putting the
device aside. Such precautions will reduce the risk
of accidentally activating the device.
c) When not in use, store in a safe place, away from
children and people not familiar with the device
who have not read the user manual. The device
may pose a hazard in the hands of inexperienced
users.
d) Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements
and for any other conditions which may impact
the safe operation of the device. If damage is
discovered, hand over the device for repair before
use.
e) Keep the device out of the reach of children.
f) Device repair or maintenance should be carried
out by qualified persons, only using original spare
parts. This will ensure safe use.
g) To ensure the operational integrity of the device,
do not remove factory-fitted guards and do not
loosen any screws.
h) Do not touch articulated parts or accessories
unless the device has been disconnected from the
power source.
i) Clean the device regularly to prevent stubborn
grime from accumulating.