Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Make sure all the connections are routed away from any
potentially pinching or slicing other metallic parts.
•
Slowly slide the radio into the sleeve until it locks in place.
•
The rubber ring will act as a seal against the DIN Sleeve.
3.2. Microphone
Connect the microphone to the microphone connector (5) and
screw the coupling nut hand-tight.
4. Disassembly
If you plan to remove the radio from DIN Sleeve, you should do it
using the provided two removal keys as explained below:
•
Fully insert both removal keys straight into the slot spaces
of the rubber ring on the left and the right edges of the
radio front panel.
•
You cannot remove the radio if only one key is used.
•
Press in fully and the radio will unlock from the sleeve
making withdrawal from the sleeve possible.
•
Store the keys in a safe place for future use
•
Now disconnect the DC and antenna connector (13 and
12).
15
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
