Advanced Operations; Work Mode; Settings Menu - Berger & Schroter MG984G-30M Bedienungsanleitung

4 Advanced Operations

This chapter explains the advanced operations for customizing the ca-
mera settings.

4.1 Work Mode

Setup mode: to program camera or to playback the photos or video
clips.
Hunting mode: when animal or human intrudes
into the monitoring region, the camera will take pic-
tures or videos automatically according to the pre-
vious programmed settings. After switching the
camera to ON position, the motion indication LED
Hunting mode
(red) will blink for about 10 seconds. This time in-
terval is for you to position the camera for automa-
tic surveillance operation..

4.2 Settings Menu

Press MENU on the remote control to enter into the menu setting. The
settings menu will be shown on the LCD.
Use "L" or "M" key to select the sub-menu, use " "key to select the
different options, use " " to change different item page. Press "OK" to
save the settings.
37