Connect To Ac Power - Hach sensION+ MM340 Benutzerhandbuch

3.2 Connect to AC power

The meter can be powered by AC power with the universal power
adapter.
1. Select the correct adapter plug for the power outlet from the adapter
kit.
2. Connect the universal power adapter to the meter
3. Connect the universal power adapter to an AC receptacle
4. Turn the meter on.
Figure 2 Connector panel
1 Magnetic stirrer 1 connector,
Channel 1
2 Reference electrode (separated
electrodes) connector, Channel 2
3 Reference electrode (separated
electrodes) connector, Channel 1
4 Separated temperature probe
connector, Channel 1
5 RS-232 for printer or PC connector
6 Power supply
(Figure 2).
(Figure
7 PC keyboard, mini DIN connector
8 Temperature probe connector,
Channel 1
9 Combined pH electrode (or
indicator) connector, Channel 1
10 Combined pH electrode (or
indicator) connector, Channel 2
11 Magnetic stirrer 2 connector,
Channel 2
Figure 3 AC power connection
3).
Note: Position the equipment so it is not difficult to disconnect power to the
equipment.
English 7