Werbung
Sliding mitre saw
INTENDED USE
The power tool is intended as a stationary machine for making straight cuts in wood with and against the grain. It is possible to
cut mitre angles of -48° to +48° and bevel angles of 0° to 45°.
The power tool is designed with sufficient capacity for sawing hardwood and softwood.
This power tool is not suitable for sawing aluminium or other non-ferrous metals.
TECHNICAL SPECIFICATIONS
Model
Rated voltage
No-load speed
Blade size
Laser type
Angle of mittre table
Bevel cutting angles
NOISE/VIBRATION INFORMATION
●
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify
additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Read the manual.
Wear safety goggles.
Keep hands away from the cutting area
while the power tool is running. Contact
with the saw blade can lead to injuries.
Laser radiation
Do not stare into the beam
Laser class 2
PRODUCT ELEMENTS (Fig 1 & 2)
1
Laser light
2
Laser light on/off switch
3
Saw arm
4
Release knob
5
Operating handle
6
Upper fixed blade guard
"G" Clamp
7
8
Rotating blade guard
9
Guard retraction arm
10
Blade bolt cover
11
Dust bag
SAFETY
MST20-255(Z1G-ZP30A-255-1)
220-240V~ 50Hz
5000 /min
Ø255mmxØ30mmx60T
Class II
0
0
0
-45
/0
/ +45
0
45
to the left
12
Bevel lock
13
Bevel scale
14
Fence
15
6mm Hex key
16
Mitre table
17
Mitre scale
18
Table insert
19
Switch trigger
20
Mitre lock knob
21
Mitre latch
22
Spindle lock
0
0
Straight cut at 0
x 0
0
0
Mitre cut at 45
x 0
0
Bevel cut at 0 x 45
0
Combined mitre cut at 45
Sound Pressure Level
Sound Power Level
Vibration Level
Pull out mains plug immediately, if the mains cable is
damaged, entangled or severed. Always remove the
mains plug before working on the device.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Wear a dust mask.
Danger zone Keep hands, fingers and
arms away from this area.
Electrical appliances must not be disposed of with
the domestic waste.
23
Slide bars
24
Slide lock
25
Trenching depth adjustment screw
26
Trenching stop
27
Trenching depth lock nut
28
45°Bevel adjustment screw
29
0°Bevel adjustment screw
30
Release latch
31
Side support bars (x2)
75x300mm
40x305mm
75 x 210mm
0
x 45
40 x 305mm
LpA=94.3 k=3dB（A）
LwA=107.3dB(A) K=3dB
2
<2.5m/s
, K=1.5m/s
Werbung
