BeeWi BBZ302 Bedienungsanleitung Seite 6

6
2.2. BeeWi HeliPad Installation
Go to Google play and look for "BeeWi HeliPad"
app. Follow the on-screen indications to download
and install the app. Once the application has been
successfully installed, you can launch it directly. Insure
the Helicopter has been paired and connected prior to
start the application.
2.3. Pairing
To pair the Helicopter with your device, refer to the pairing procedures in your mobile
phone user manual and follow the instructions below:
- Power on the Helicopter to turn the unit in pairing mode (wait 30 seconds)
- In the Smartphone Bluetooth menu, search for devices, select the device named "BeeWi
BBZ302" to pair it. When prompted, enter the pass key "0000".
Note: you can also pair the Helicopter directly in the app by opening the "Select Helicopter"
Menu and searching the Helicopter. In that case, select the device name "BeeWi BBZ302"
on the screen and enter the pass key "0000" to add this device in your phone device list.
3. USING THE HELICOPTER
3.1. Connection
Open the BeeWi HeliPad application and display the application menu using the mobile
Menu key then press "Select Helicopter" to see the list of paired devices.
ENGLISH
Downloaded from www.Manualslib.com manuals search engine