Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specification - FOREVER ABS-200 Bedienungsanleitung

Kabellosser lautsprecher
Inhaltsverzeichnis

Werbung

EN
EN
Thank you for purchasing a product by Forever. Before use, please refer to the User's manual, and
save it for future reference. Do not disassemble the device on your own – all repairs should be
done by a service technician. Use only original parts and accessories provided by the manufac-
turer. The device should not be exposed directly to water, moisture, sunlight, fire or other heat
sources. We hope that the product by Forever fulfills your expectations.

Technical specification

1. Output power: 3 W
3. Charging input: Micro USB 5 V
4. Battery: 300 mAh/3.7 V
5. MicroSD card slot
6. In-built microphone
7. Operation time: up to 3 hours
8. Charging time: 2 hours
9. Bluetooth version: 4.1
10. Signal to noise ratio (SNR): >80 db
Instruction manual
Charging
When the battery charge level is low, connect the loudspeaker to 5 V charger or to a PC via USB
cable. After charging is complete, LED will lit in red.
Turning ON/OFF
Hold and press ON button until blue LED at the side lights up. Bluetooth will activate automatically
Second long press will deactivate the device.
Bluetooth function
Turn the loudspeaker on, Bluetooth will activate automatically. Place the loudspeaker close to
a transmitter, not further than 10 meters. In the list of the device/transmitter, find loudspeaker
name "ABS-200", and then select and pair it. Short press ON will stop or resume playing
Answering calls
To answer a call when Bluetooth function is activated, briefly press ON. Briefly pressing ON during
a call will suspend the call.
Music playing
Vol +
– brief press / next track – long press
Vol –
– brief press / previous track – long press
ON/OFF
– long press / PLAY, PAUSE, Answering a call – brief press / MODE – two brief presses
4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis