Troubleshooting - PNI HUNTING 280C Benutzerhandbuch

Trigger speed
Trigger interval
Microphone
POwer supply
Battery
External power
supply
Standby
consumption
Standby battery life
Power off voltage
Ports
Temperature
Water resistance
class
Dimensions
Weight

Troubleshooting

Photos do not capture the subject
1. Check the PIR sensitivity parameter. For high temperature environment
conditions, set the sensitivity level to High and for use in low temperature
conditions, set the sensitivity level to Low.
2. Try to install the camera in an area where there are no heat sources in the
field of view of the room.
3. In some cases, positioning the camera near water will cause the camera to
take images without a subject in it. Try to point the camera at the ground.
4. Try to place the camera on stable and immovable objects, ie: large trees,
thick poles, etc. Avoid mounting on thin trees or branches that can be moved
User manual
0.8 - 1 sec.
5 - 7 sec.
Yes
Battery 9V/DC 12V
12 x AA
DC 12V
0.15mA
5 - 8 months (with 6 AA batteries or 12 AA
batteries)
Alkaline batteries: 6.3V
NI-MH battery: 6.0V
DC power supply: 6.5V
Micro USB, SD card slot, DC port
-26°C ~ +60°C
IP66
118 x 78 x 144 mm
350 g (without batteries)
16