Charging Usb Device; Replacing The Backup Battery - snuutje PINO Gebrauchsanleitung

ENABLING
− Press SLEEP/WAKE to activate the function;
shown on the display.
At the set times, the process described under "How the
sleep trainer works" starts.
− To deactivate the function again later, press SLEEP/
WAKE again
( goes out)

CHARGING USB DEVICE

You can use the USB socket to charge devices such as
smartphones or MP3 players.
Pay attention to the manufacturer's
instructions for the device you are connecting.
− Connect the USB socket 5V 1A and the external device
with a USB cable (not included).

REPLACING THE BACKUP BATTERY

1. Open the battery compartment on the bottom and
remove the old battery.
2. Push the new battery under the two retaining tabs and
then press it down with a little force so that the battery
lies firmly under the retaining tab and clicks into place.
Pay attention to the correct polarity (+/-). The plus pole
(+) must point upwards.
Pay attention to the following:
‚ Only use the type of battery that is specified in the
"Technical data".
‚ Dispose of the old battery in an environmentally
responsible way (see "Disposal").
48
is