Start-Up; Removing Iso-Strips; Making The Electrical Connection - snuutje PINO Gebrauchsanleitung

START-UP

REMOVING ISO-STRIPS

In the event of a power failure, a CR2032, 3 V battery
ensures that the settings made (e.g. wake-up times) are
saved for several hours. When delivered, this backup
battery is already inserted and provided with an iso-strip to
protect it from premature discharge.
The battery compartment is located on the underside of
the device.
1. Use a coin or similar object to turn the battery
compartment cover clockwise until it stops.
2. Completely remove the iso-strip protruding from the
battery compartment.
3. Turn the battery compartment cover counter-clockwise
as far as it will go.
You can also operate the device without a
backup battery. It is not possible to operate the
device using only the battery.

MAKING THE ELECTRICAL CONNECTION

1. Plug one end of the USB cable into the connection
socket DC 5.0V.
2. Use the other end to plug into the USB connection
socket (for example, your PC), or use the included USB
power adapter to plug the device into a mains outlet.
As soon as the device is supplied with power, the
display frame lights up briefly and information is shown
on the display.
38