Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Option
• In order to handle bulky frames that can not be secured with
the carrying rollers, the carrying roller can be exchanged for
the rubber-lagged universal holding pin.
(set of 3 pcs. Ref.no. 589 4739)
• To this end, loosen the star knob, then exchange the rear
carrying rollers for the universal holding pin. (fig.8 + 9)
7. Maintenance
• Regularly clean off dirt and dust from the device.
• Occasionally lubricate the swivelling mechanism with universal grease.
• Once a year, make sure that the M10 lock nut of the swivelling mechanism is seated
correctly.
• Once a year, check the pneumatic fittings and pressure hoses on leaks or deformation.
• Before servicing the pneumatic system, disconnect the device from the compressed air
supply.
• Replace all defective or damaged parts promptly.
8. Waste disposal
• Carrying rollers = plastic POM
• Clamping levers, star knobs and ball handle = plastic PA and/or PP
• Housing of pneumatic cylinder = Aluminium
• Further parts = steel scrap
fig. 8
fig. 9
19
Werbung
Kapitel
Inhaltsverzeichnis
