Table of contents
1. General information, correct use
2. Safety instructions
1. General information, correct use
The pneumatic mounting stand for bikes (with three-point-support) is designed to secure a
bicycle frame in order to lift and to swivel it into an ergonomic working position.
With its three adjustable carrying rollers or mandrels (optional), the stand can secure bicycle
frames without looseness, and therefore is also suitable for pressure-sensitive carbon or
aluminium frames.
The pneumatic cylinder makes it possible to lift even heavy bicycles (up to 35 Kg, e.g.
including electric motor) without great effort.
2. Safety instructions
Caution!
Make sure that the bicycle frame is correctly seated on the three carrying
rollers. It may fall down and be damaged.
Caution!
When fastening the device to the floor, never exceed the safe floor-load.
You can also use the base plate (option).
• In case of heavy electric bicycles, first hang the handlebar onto the front carrying roller,
then lift the back side of the bike and fasten it onto the second carrying roller.
• This manual explains the correct handling of the device. It should be studied before the
device is used for the first time, and be read regularly when the device and its accessories
are used.
Tilting risk!
14
page
2
2
3
3
4
5
7
7
8
11