6. Handling
• Lower the swivelling mechanism to the end by
actuating the pneumatic valve.
• Roughly pre-adjust the three-point-support. To this
end, push the right carrying roller outwards to the right
as far as possible, then lock it with the star-knob. (fig.3)
• Lift the bicycle and hang it onto the carrying rollers.
• In case of heavy electric bicycles, first hang the
handlebar onto the front carrying roller, then lift the
back side of the bike and fasten it onto the second
carrying roller.
• Shift the second carrying roller outwards into the
appropriate position, then lock it with the star knob so
as to secure the bicycle frame without looseness.
(fig.4)
• Fit the lower carrying roller into the angle between the
seat tube and the down tube. Correctly lock the
clamping lever for carrying roller (fig.5)
fig.3
fig.4
fig.5
17