Werbung
D E S C R I P T I O N
For endless hose bands - for clamping, tightening and cutting.
Tightening either with the T-handle or 13 mm socket spanner.
The hose strap mounting device facilitates assembly and ensures a tight fi t of hose
clamps. After tighten, the clamp can be reduced to the appropriate length by the
integrated cutting device. Thus a clean installation is possible.
M A N UA L
1.
Mount hose strap
2.
Put the open end through the front opening of the
mounting device and push it through the slot in
the tensioning lever.
3.
Turn the tensioning lever until the hose strap
has a tight fi t.
4.
Cut off the hose strap by turning the cutting lever.
4
61740L_manual_75600_de_roh.indd 4
61740L_manual_75600_de_roh.indd 4
Cutting lever
Tensioning lever
11.01.21 12:43
11.01.21 12:43
Werbung
