Litecraft Mini PAR AT10 Bedienungsanleitung Seite 8

Downloaded from www.Manualslib.com
• Make sure that the cable has never been squeezed or damaged by
sharp objects. Check the device and the cables regularly.
• If the cable is damaged, it must be replaced immediately by the
manufacturer, its service agent or a qualified person in order to avoid
danger.
• Lenses, glasses or UV filters must be replaced if they are visually
damaged, or their effectiveness is impaired, e.g. by broken glass or by
deep scratches.
• Ensure that wires never come in contact with other wires! Handle the
power cord and all connections with caution!
• Make sure that the line voltage is not higher than the voltage specified in
this manual.
• Disconnect the unit from the AC mains when it is not in use or when
cleaning it. Disconnect the connection only by pulling the cable plug.
• Using the fixture for the first time, can result in light smoke and odors.
This is a normal process and does not constitute a defect.
• RISK OF BURNS! Do not touch the unit during operation! The housing
may reach high temperatures.
• RISK TO HEALTH! Never look directly into the light source. Epileptics
risk an epileptic shock! Disconnect the unit from the AC mains when not
in use or when cleaning it.
• Defects caused by modifications of the device by unqualified handling or
an unqualified person are not covered by the warranty.
• Keep the product away from children and unskilled people.
• There are no wear parts in the device. Maintenance and service must be
performed only by an authorized service partner.
manuals search engine
II