Basic Operation; Technical Specifications; Useful Tips - Vieta Home VH-MS170BK Gerätehandbuch

Basic Operation

I. FUNCTION CHOOSE
Press the "function" key on the remote control,
you can choose to play CD, MP3, USB, AUX,
BLUETOOTH or FM radio as you like.
II. USB PLAYING
Insert USB flash driver, and then press the "function"
key to choose USB status, and then press PLAY key,
it will begin to playing the file from USB flash driver.
III. FM RADIO
Using the FM antenna, if it is the first time for you to
use this unit, please choose FM auto to search the
radio station, save the stations automatically.
Press "FWD /NEXT" or "REV /PREV", you can
choose the next or last FM station. You can also
revise tThe keys "NEXT and PREV" , when you press
it more than 3 seconds,
Have the function to search the next station which is
with signal.
he stored FM channel's position by using "Memory"
key.
IV. AUX IN
Press the "function" key to choose AUX, it will
show INPUT on the LED display. And then through
the audio input terminals on the back side of the
machine, it will play the external audio signal on this
unit. Contact the external audio signal with the audio
input terminals on the back side of the unit, and then
the enlarged music signal will come out from this unit
at the same time.
V. BLUETOOTH
Press the "function" key to enter into the Bluetooth
status. And then please do as follows:
1. Open the Bluetooth function on your mobile phone
or other Bluetooth device, it will begin to search for
the Bluetooth device.
2. This unit's Bluetooth name is "VIETA". Please
choose and connect it, finally your phone or other
Bluetooth device will pair with this unit successfully.
3. After connecting, you can begin to enjoy the music
from this unit.
20
Downloaded from www.Manualslib.com manuals search engine

Technical Specifications

Product type:
CD MICRO SYSTEM
Compatible disc type:
CD, WMA, MP3, CD-R/RW discs etc.
Audio output level:
1.0-2.2V
Audio signal to noise ratio:
≥70dB ( A weighted )
Power voltage:
90-240V 50-60HZ
The instructions are only for reference, the company
will reserve the right to modify specifications in this
document without any prior notification.

Useful Tips

In order to extend the local machine life, the switch

time between machines turn on and off must be more
than 30 seconds.
Turn off the power after using.

The use of power should correspond with the mark

voltage values, otherwise it will not play.
For some of the discs, using some of the features of

this machine, it can not be achieved.
If appear contingent dead halt, please restart the

machine.
CD Microsystem