Important Safety Instruction; Placement And Maintain For The Unit - Vieta Home VH-MS170BK Gerätehandbuch

Important safety instruction

Please read this user manual carefully before

you use this product. Please reserve it properly for
reference in the future.
Please do not expose the unit in the raining or moist

environment to avoid fire hazard or electric shock.
Caution: Please do not open the unit to avoid fire
hazard or electric shock. The corresponding repairs
should be done by professional person,
2. To prevent the laser from being exposed, do not
remove the cover. Refer servicing to qualified person.
Protection of Power Cord
1. Hold the plug well when you plug the power cord in
or out.
2. Please do not put the AC power cord near any heat
source equipment.
3. Please do not place any heavy objects on the AC
power cord.
4. Please do not overhaul the AC power cord.
5. This unit belongs to CLASS 1 laser product.
6. There is CLASS 1 product mark on the rear panel.
7. This product contains a low power laser device.
In order to keep safety, please do not open the unit
to expose the inside parts. If there is some problem
need to be repaired, please let the professional people
check and repair it.
14
Downloaded from www.Manualslib.com
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This mark warns the user that there is
High Voltage, Please prevent from electric
shock.
This mark warns the user that there are
some important instructions for Operation
and Maintaining attached to the unit.
1. This unit is a CLASS 1
Laser product and employs a
laser inside the cabinet.
manuals search engine

Placement and maintain for the unit

1. Please do not put the unit in a sealed place or cover
something onto the unit, to avoid the unit damaged by
its inside temperature's abrupt rising.
2. Please do not expose the unit under the sunshine
directly or place it near the heat source equipments.
3. Please do not place any container with water or
fire liquid. If there is any liquid in, please plug out the
power cord and contact with the professional repairer.
4. Please do not open the unit to contact the inside
components. Otherwise it may cause electric shock or
unit damage. If need any repairs or adjustment, please
provide this unit to the professional person.
5. Please put the unit on the horizontal surface. Please
do not put any heavy object on the unit.
6. When the unit pauses, please set it to the standby
state. If you do not want to use the unit for a long time,
please take off the power cord from the AC power
socket, and take out the Li-battery from the unit.
7. Do not put your fingers or other objects into the unit.
8. Under the following circumstances, there will be
condensed dew on the Lens:
1). When the heat source equipment was just
activated.
2). In a very damp room or a room with vapor.
3). When the unit is just moved from a colder place
to a hotter place.
9. Pull the plug out of the socket before cleaning the
unit. Use a piece of wet cloth for cleaning. Please do
not use detergents or sprays, which will cause the
liquid enter into the inside unit and cause unit damage,
fire hazard or electric shock. This kind of liquid will also
damage the surface of the unit.
10. Please do no repair the unit by yourself.
11. If there is Dirt or Friction on the Lens, It will impair
sound, or even make it no sound when disc playing.
CD Microsystem