Einhell Global EURO 8/24 Bedienungsanleitung Seite 9

Anleitung Euro 8-24
Read this manual carefully before putting the compressor into operation!
Technical data
Power supply
Motor rating in kW/h.p.
Compressor speed in rpm
Operating pressure in bar
Pressure vessel volume in litre
Theoretical intake rate in l/min.
Sound power level LWA in dB(A)
Sound pressure level LPA in dB(A)
Protection type
Machine weight in kg
Points to note when
setting up the
compressor
G Examine the machine for signs
of transit damage. Report any
damage immediately to the
company which delivered the
compressor.
G Before you put the compressor
into operation, check the oil
level in the compressor pump.
G The compressor should be set
up near the working consumer.
G Avoid long air lines and long
supply lines (extensions).
G Make sure the intake air is dry
and dust-free.
G Do not set up the compressor
in damp or wet rooms.
G The compressor may only be
used in suitable rooms (with
good ventilation and an
ambient temperature from +5°
to +40°C). There must be no
dust, acids, vapors, explosive
gases or inflammable gases in
the room.
G The compressor is designed to
be used in dry rooms. It is
prohibited to use the
compressor in areas where
work is conducted with sprayed
water.
Downloaded from www.Manualslib.com
21.10.2004 13:18 Uhr Seite 9
230 V ~ 50 Hz
1,5 / 2
2850
8
24
210
97
87
IP 20
31
Safety instructions for Note the safety
working with instructions for paint
compressed air and spraying!
paint sprayers
Important! Note the pertinent
accident prevent regulations in
Important! Note the pertinent
force in your area!
accident prevent regulations in
force in your area!
G Never process paints or
solvents with a flash point
Compressors and lines reach
below 21°C.
high temperatures during
G Never heat paints or solvents.
operation. Avoid contact! Risk of
G It is imperative to use filtering
burns!
equipment (face masks) when
processing harmful liquids.
Gases or vapours drawn in by the
Note also the information
compressor have to be kept free
concerning safety precautions
of constituents that may cause
published by the manufacturers
fire or explosions inside the
of these liquids.
G Smoking is prohibited during
compressor.
the spraying operation and in
When you disconnect the hose
the work room. Paint vapours
coupling, hold the coupling
are highly flammable.
G Make sure there are no open
element in your hand to prevent
injury from the whiplashing hose.
fires or open lights in the work
room. Sparking machines are
Wear goggles when working with
not to be used.
G Do not keep or consume food
the blow-out gun. Injuries may
easily result from foreign bodies
and drink in the work room.
and blasted parts.
Paint vapours are harmful.
G The details and designations of
Never point the blow-out gun at
the Ordinance on Hazardous
other persons and never use it to
Substances, which are
clean clothes that are still being
displayed on the outer
worn.
packaging of the processed
material, must be observed.
Additional protective measures
are to be undertaken if
manuals search engine
GB
9