General Information; Led Display - Raikko ACCUPACK 8000 Bedienungsanleitung

English

General information

Operation (function key):
• Hold down the function key for 2– 3 seconds in order to enable
the battery pack. The LED display lights up briefly from left to
right.
• The charging process now starts automatically. The LED display
lights up from left to right during the charging process. The
display repeats continuously during the charging process.
• Press the function key to indicate the current battery level. The
number of lit LEDs indicates the remaining capacity. This inter-
rupts the charging process.
• Pressing the function key again will restart the charging process.
• Hold down the function key for 2–3 seconds to disable the
battery pack again. The LED display lights up from right to left
and then switches off. In doing so, any possible charging is
interrupted.

LED display:

The charging status of the AccuPack can be ascertained using the
LED display.
1 LED illuminates:
2 LEDs illuminate:
3 LEDs illuminate:
4 LEDs illuminate:
5 LEDs illuminate:
12
Downloaded from www.Manualslib.com
USB ACCUPACK 8000
10 % – 30 %
30 % – 50 %
50 % – 70 %
70 % – 90 %
90 % – 100 %
manuals search engine
English
Charging:
Please charge the AccuPack completely before using it for the
first time.
Charge the AccuPack using either a PC or laptop USB port or
using a USB mains adapter. To do this, take the charging cable out
of the packaging and plug the mini USB adapter onto it. Connect
the mini USB plug to the AccuPack, and then connect the standard
USB plug to the PC, laptop or mains adapter.
The LEDs on the device illuminate from left to right during the
charging process. The number of permanently illuminated LEDs
shows the current charging status. If the LEDs are extinguished,
this means that the maximum capacity has been reached and the
battery is now fully charged.
Charging period:
The charging period depends on the performance capability of the
USB port being used. USB connections on PCs or laptops often
only provide very low charging currents (~500 mA). In this case,
a complete loading cycle can take up to 15 hours. More powerful
adapters can shorten the charging time accordingly.
USB ACCUPACK 8000
13