Record; Repeat; Low Battery Alert - Earise T26 Pro Benutzerhandbuch

RECORD

1. The recording function only work when a TF card or USB flash drive
inserted.
1. Insert the TF card or USB flash drive, the speaker will automatically
switch to USB / TF mode, and "U / TF" will be displayed in the upper
left corner of the display screen.
2. Before recording, make sure that you have sufficient recording storage
space.
3. Make sure there is at least one song in the TF card or USB flash drive,
otherwise the recording function will not work.
4. Please turn on the microphone before press the "REC" button,
otherwise the recording function will not work.
5. Press and hold the "REC" button to start recording.
6. Press the "REC" button to pause or resume recording.
7. Press and hold the "REC" button again to finish recording.
8. After recording, press the "REC" button to listen to the recording file
just recorded.
9. Deleting a recording file: When playing a recording file, press and
hold the "MODE" button to delete the current recording file.
10. The recording file format is MP3.
11. Please note that it cannot play music in recording mode.

REPEAT

2. The repeat function only work when a TF card or USB flash drive
inserted.
3. Press the "REP/Light" button to select a loop mode.
4. There are 4 modes: ONE (single song cycle), FOLD (loop the playlist
in a folder), RAN (play all songs randomly), ALL (loop all playlist of all
folders).

LOW BATTERY ALERT

1. When there's only 20% power left, "
screen and the volume will automatically decrease to about 70%, .
" will flash on the display