Bluetooth; Microphone; Disco Light - Earise T26 Pro Benutzerhandbuch

BLUETOOTH

1. Power on the speaker. The default mode is Bluetooth. The screen
display shows "BLUE" and it will flash.
2. Turn on the device's Bluetooth, search for "EARISE T26 Pro", and
click to pair.
3. A voice prompt "Bluetooth connected" to be heard indicates a
successful connection. The display "BLUE" stops flashing.

MICROPHONE

1. The package includes two wireless microphones.
2. Each microphone needs 2pcs AA batteries, which are not included.
3. After installing the batteries, push the power switch to the top side
to turn on the microphone, the screen display shows "MIC" at the
same time.
4. When the power switch is in the middle, it means the microphone is
standby.
5. Please keep the microphones 1 meters far away from the speaker,
or it will cause a shrill noise.

DISCO LIGHT

1. Press and hold the "REP/Light" button to choose a light mode:
multi-color mode 1 (default, cold light), multi-color mode 2 (warm
light), fast flashing in several colors, and alternating single-color and
two-color flashing. The disco light will flash according to the music.
2. Press the "REP/Light" button twice to turn off the disco light.
3. Press the "REP/Light" button twice again to turn on the disco light.
EQ
1. EQ function only works for USB / TF mode.
2. Press the "EQ" button to select a EQ mode.
3. There are 5 EQ modes: normal, rock, pop, classic, jazz, country.