Usb; Tf Card; Echo - Earise T26 Pro Benutzerhandbuch

3. If connected to a wireless microphone, simply connect the wireless
receiver via the "MIC IN" jack.
4. Please note that the frequency of the wireless microphone cannot be
the same as the original microphones', otherwise it will cause
interference.

USB

1. Press the "MODE" button to switch to USB / TF mode.
2. Insert a USB flash drive and the speaker will automatically start playing
the existing music from the first song. The display shows "U / TF" in the
upper left corner.
3. The song file format must be MP3.
4. The USB flash drive must have a capacity of 8G to 32G.
5. The USB flash drive must be USB 2.0 and the file system must be
FAT32.
6. If the USB flash drive is formatted and the file system is not FAT32,
it will not work properly.

TF CARD

1. Insert the TF card and the speaker will automatically start playing the
existing music from the first song. The display shows "U / TF" in the
upper left corner.
2. The song file format must be MP3.
3. The capacity of the TF card must be 8G to 32G.
4. The file system of the TF card must be FAT32.

ECHO

1. Press the "ECHO" button to select the intensity of the reverb, there are
4 levels: E00, E01, E02, E03. E00 is off, and E03 is the strongest.
2. Please note that the reverb only works for the microphone, it doesn't
work on the background music.