Recharging With The Solar Panel (A) - Silvercrest SLS 14 A1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SLS 14 A1

9.1. Recharging with the solar panel (A)

Please note that the output power that can be generated by the solar panel (A) when
used indoors is reduced due to the filter effect of glass panes.
Note that the maximum ambient temperature of +45°C must not be exceeded. You
must pay particular attention to this point when using the solar panel inside a motor
vehicle.
Make sure that the solar panel (A) is optimally orientated towards the sun and receives sufficient
sunlight. Optimal efficiency is achieved when the sun's rays hit the solar cells (1) at an angle that is
as vertical as possible (Figure a). The solar panel (A) is less efficient if the sun's rays hit the solar
cells (1) at a flatter angle (Figure b).
The LEDs above the USB ports (5) assist you with the optimum orientation of the solar panel (A). To
do so, your end device must be connected. The display result is distorted if no end device is
connected.
Note which LED lights up or flashes and, if necessary, correct the orientation towards the sun. For
the meaning of the LED display, please refer to the following table.
8 - English