Herunterladen Diese Seite drucken

SW Stahl PROFI Tools 26093L Bedienungsanleitung Seite 6

Vergaser synchrontester

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

M U LT I - C Y L I N D E R E N G I N E S
Here are several adjustment screws available. Four-cylinder, have three adjustment
screws. A screw located between the outer two carburettors and one in the middle. First,
two outer carburettors are synchronized like the 2-cylinder engine. Then adjust of the
other two outercarburettors. The displayed values of different groups, 2 left and right
carburettors are not taken into account. If both carburettors of both groups synchronized,
adjust the values of the two carburettor groups
N O T E
At carburettors that are activated by several cable, as e.g. for motorcycles of the
manufacturer e.g. BMW and Moto Guzzi. There must be done a basic setting according
to the manufacturer, before synchronized the carburettors.
6
26093L_manual_75600_en_de_roh.indd 6
26093L_manual_75600_en_de_roh.indd 6
17.11.20 16:09
17.11.20 16:09

Werbung

loading