Assembly Hub15Move; Operation; Generell - HOLZMANN-MASCHINEN HUB15FLEX_24V Betriebsanleitung




15.2.2 Assembly Hub15Move




OPERATION

16.1 Generell

Do not operate the machine with a low battery charge under 30%.
To start the machine, the emergency stop switch must be unlocked.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
3. Connection of the plug.

1. Align the holes of the tiller arm (1) and hydraulic
system and insert the axle (3) - see sketch. The
locking pins (4) should be well clamped in the holes
on each side of the pump casing.
4. Connect the plug.

N O T I C E
N O T I C E
Take care of a correct cable installation, see
scetch.
2. Guide the chain with the
adjusting screw and the adjusting
nut through the hole of the axle.
3. bring tiller arm to lowest position
tilt down and remove locking pins.
N O T I C E
Achten sie auf eine korrekte Kabelführung, siehe
Skizze
OPERATION
21
HUB15FLEX_24V; HUB15MOVE_24V