Transport; Assembly; Check Scope Of Delivery; Assembling The Machine - HOLZMANN-MASCHINEN HUB15FLEX_24V Betriebsanleitung

A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety note designed in this way indicates a potentially dangerous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, your common sense and your corresponding technical
suitability/training are and will remain the most important safety factor for error-free operation of
the machine. Safe working depends first and foremost on you!

TRANSPORT

Damaged or not sufficiently viable hoists and lifting devices can cause serious injury
or even death. Always check hoists and load lifting devices for adequate load-bearing
capacity and perfect condition, carefully fasten the loads and never keep them under
suspended loads.
Attach the lifting belts to the bottom of the forks and pay attention to a balanced weight
distribution.

ASSEMBLY

15.1 Check scope of delivery

After delivery, check the machine immediately for transport damage and missing Parts.

15.2 Assembling the machine

The machine is pre-assembled only the tiller arm has to be assembled and the electrical connection with the control
Elements has to be established.

15.2.1 Zusammenbau Hub15Flex

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
C A U T I O N
N O T I C E
W A R N I N G
1. Assembly of the tiller arm:
Align the holes of the tiller arm with the holes in the machine and connect
them with the bolts, see sketch.
2. Remove the fixed spring safety pin:
Pull the handle down to the lowest position, remove the fixed spring safety
pin carefully.
TRANSPORT
20
HUB15FLEX_24V; HUB15MOVE_24V