Add Devices In Ap Mode - Tubble MAX Bedienungsanleitung

Notice:
If the Timer/Wi-Fi Button does not flash after pressing it for 5s, keep pressing it until
it starts flashing. It can happen that the Wi-Fi indicator will only turn on after 10s. If
you turn off the device, the Wi-Fi function needs to be reset when you turn it on
again.

Add Devices in AP Mode

1. If failed in Easy Mode, users could also add devices in AP Mode.
2. Press the Wi-Fi button for more than 5 seconds until the Wi-Fi indicator light begin
to flash slowly, it means the device is already for configuration in the AP Mode.
3. Tap "+" on the top right corner of the APP. Select AP mode and tap it. Then tap
"Ensure the indicator flashes slowly". Then tap "Connect now" to go to the WLAN
Settings interface in your mobile phone and select the Wi-Fi network named "Smart
Life_XXXX" to connect it.
4. Return to the "Smart Life" APP, the connection will start automatically.
13