Adjusting The Auxiliary Handle; Operating Tips - Toro Power Plex 51130 Bedienungsanleitung

Adjusting the Auxiliary
Handle
1. Release the auxiliary-handle latch (A of
14).
2. Slide the auxiliary handle up or down to your
desired height (B of
Important:
Do not remove the rubber
bumper.
3. Close the auxiliary-handle latch to secure the
auxiliary handle in place (C of
Figure 14
Trimming
Figure 15
Edging
To use the trimmer as an edger, refer to the following
steps:
Figure
Figure 14).
Figure 14).
1. Press the rotator button, rotate the head 90°,
and make sure that it locks into place (A of
Figure 16).
2. Stand the trimmer on the wheel and begin
edging (B of

Operating Tips

g189875
•
Keep the trimmer tilted toward the area being cut;
this is the best cutting area.
•
The string trimmer cuts when you pass it from left
to right. This prevents the trimmer from throwing
debris at the you.
•
Use the tip of the string to do the cutting; do not
force the string head into uncut grass.
•
Wire and picket fences cause extra string wear,
even breakage. Stone and brick walls, curbs, and
wood may wear string rapidly.
•
Avoid trees and shrubs. Tree bark, wood moldings,
siding, and fence posts can easily be damaged
by the strings.
g189888
1. Direction of rotation
14
Figure 16).
Figure 16
Figure 17
2. String path
g189885
g189887